SikaEmaco S 466 Pumpable, Free Flowing, Shrinkage Compensated Micro-concrete For Grouting And Repair

SikaEmaco S 466 is a high-strength precision concrete, requiring only the on-site addition of water to provide a free-flowing concrete ideally suited for placing in nominal thicknesses of 40mm and above.

​When mixed, applied, and cured in accordance with the manufacturer’s instructions, SikaEmaco S 466 produces free-flowing precision concrete free from segregation and bleeding.

​SikaEmaco S 466 is a pre-packaged blend of Portland cement, carefully graded natural aggregate, specially selected sands, fillers, shrinkage control agents, and fluidifies. When mixed with the stated amount of water it produces a free-flowing, cohesive, precision concrete that hardens to produce a dense, durable surface. ​

Whenever a material is required to reconstruct heavily congested areas and areas with difficult access.

​​​SikaEmaco S 466 is the ideal material for vertical or horizontal structural repairs wherever the use of formwork is preferable to hand or machine-applied repair systems. Its high early and ultimate strength enables formwork to be stripped at an early​​​​​ age thus minimizing delays.

​Due to its rheoplastic nature, SikaEmaco S 466 can be utilized as a grout and poured under a head of pressure. SikaEmaco S 466 should not be used where the depth of voids to be filled is less than 20mm.​

• Columns
• Walls
• Beams
• Honeycombed concrete​​
• Floors

• ​Guaranteed performance – the material is precision blended in the factory to ensure consistent results
• Durable – utilization of low water-cement ratio ensures minimum permeability and high durability
• Free-flowing – eliminates honeycombing in areas of congested reinforcement
• Self-compacting – ensures complete filling of spalled/damaged areas
• Shrinkage compensated – unique formulation provides a dual expansion system in the plastic and hardened states
• Easy to use – simple on-site addition of water