Hurry! Exclusive offer ends tonight – shop
now before it’s gone!
Hurry! Exclusive offer ends tonight – shop
now before it’s gone!
Hurry! Exclusive offer ends tonight – shop
now before it’s gone!
Polyethylene Pipes Resistant to Temperature (PE-RT)
Outside diameter range is 16-32 mm. Pipes are supplied in coils
The product is produced according to the international standard ISO: EN ISO 15874:2004, German standard: DIN 8077-8078.
All products are certified with the following ISO standards:
ISO 9011:2008
ISO 14001: 2004
ISO 28001: 2001
All PPR piping Systems products are certified with the German SKZ Certification Certificates No. A528 and A529.
PE-RT / PPSU system is produced according to the latest and improved technologies in plumbing and heating systems. After many years of research and technology improvement, we proudly present our own PE-RT / PPSU system. Easiness of application both for push-fit and press-fit systems makes it a perfect solution for modern plumbing and heating applications, and lightweight and high raw material resistances are a huge advantage over brass systems in the same applications.
PERT is developed to improve the long-term strength at high temperatures of HDPE material. PERT significantly improved processability and long-term strength at high temperatures of HDPE, especially for industrial pipe applications.
Polyphenylsulfone (PPSU) is a type of moldable plastic often used in rapid prototyping and rapid manufacturing applications. PPSU is a heat and chemical-resistant material. It is typically used in automotive, aerospace and plumbing applications. Polyphenylsulfone has virtually no melting point, due to its amorphous nature, and offers tensile strength up to 8000 psi. Its commercial name is Radel.
PPSU is the highest performing thermoplastic that gives better durability and heat tolerance than PP and PES. PPSU have the extreme capability to absorb impact, PPSU plastic does not absorb odor or color. It is naturally BPA free. They are are commonly used in aerospace and medical devices that require repeat sterilization.
Single layer PERT pipes are produced by extrusion method. This is the most common, basic and cost-effective pipe in PERT range.
PERT single layer pipes for under floor heating, water temp. up to 60⁰C , PN. 1.0 MPa (Series Code 020100100000)
PERT/Al/PERT pipe is made of 5 layers with outside and inside layers produced of PERT. Middle layer is made of overlap or butt-welded aluminium layer. Outside and inside polymer layers are connected to aluminium by high-molecular adhesive layers. Aluminium layer guarantees low thermal expansion and 100% oxygen barrier.
PERT/AL/PERT overlap welding composite pipe for cold, hot water transportation, heating systems, water temp. up to 95⁰C, PN. 1.0 Mpa (Series Code – 020100300000)
PERT/AL/PERT but welding composite pipe for cold, hot water transportation, heating system, water temp. up to 95⁰C, PN. 1.0 MPa (Series Code – 020100400000)
PERT/AL/PERT overlap welding composite pipe for gas transportation for indoor application, yellow color, PN. 1.6 Mpa (Series Code – 020100500000)
PERT/AL/PERT but welding composite pipe for gas transportation for indoor application, yellow color, PN. 1.6 MPa (Series Code – 020100600000)
PERT/AL/PERT overlap welding composite pipe for air conditioning systems for indoor application, silver color, PN. 1.0 Mpa (Series Code – 020100700000)
PERT/AL/PERT but welding composite pipe for air conditioning systems for indoor application, silver color, PN. 1.0 MPa (Series Code – 020100800000)
A-Oxy PERT/EVOH/PERT pipe is made of 5 layers with outside and inside layers produced of PERT. Middle layer
is made of EVOH oxygen barrier layer.
Outside and inside polymer layers are connected to EVOH by
high-molecular adhesive layers. EVOH layer guarantees 100% oxygen barrier.
PERT/EVOH/PERT multilayer composite pipes with oxygen barrier for under floor heating, water temp. up to 60⁰C , PN. 1.0 MPa (Series Code – 020100200000)
ANBI sells 3 kinds of PE-RT pipes: single layer, PE-RT/Al/PE-RT multilayer composite and PE-RT/EVOH/PE-RT oxygen barrier five layer composite pipes.
Press-fit, Push-fit PPSU Fitiings for heating and water supply.
PPSU press-fit fittings and valves for drinking, hot and cold water transportation, air conditioning and cooling systems.
Produce PPSU push-fit fittings and valves for drinking, hot and cold water transportation, air conditioning and cooling systems.
Produce PPSU push-fit fittings and valves for drinking, hot and cold water transportation, air conditioning and cooling systems.
